Back to login
Lexus GS 350
Model Overview
The Lexus GS 350 is the Japanese brand's mid-range luxury sedan. Sized and priced to compete with some of Germany's best-known upscale cars, the GS 350 brings a distinctly Japanese feel to the segment. Inside the cabin, you'll enjoy high-quality materials and finishes. Handling is sharp and nimble, and the smooth V6 engine provides satisfying power. Compared to those German models, the GS 350 is a strong luxury sedan value.
Photos
Reviews and News
Owner Scores
This vehicle has not yet been reviewed
Recall Information
* Data provided by Transport Canada
Recall number
Recall date
System affected
Model year(s) affected
Recall number
2021-723
Recall date
2021-11-24
System affected
Accessories
Model year(s) affected
2007 2008 2009 2011 2013 2015 2016 2017 2018 2019
Manufacturer Recall Number:
SRC XC8/XC9 / SRC RC8/RC9 / SRC RD1/RD2
Units Affected:
51,373
Notification Type:
Safety Mfr
Issue:
This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships.
On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt.
Note: This recall only affects the following block heater/cord part numbers:
C014003034 PK5A408J09 PU14000904
C014003151 PK5A408J13 PU14000905
C014000885 PK5A489J11 PU14000907
C014000888 PK5A489J22 PU14000909
C014000907 PK5A410H00 PU14000911
C014100904 PU14000900 PU14000913
C014100907 PU14000901 PU14003571
C014100911 PU14000902
PK5A408J05 PU14000903
Safety Risk:
Engine block heater wiring that overheats or melts could create the risk of a fire.
Corrective Actions:
Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.
Recall number
2020-577
Recall date
2020-11-27
System affected
Lights And Instruments
Model year(s) affected
2013 2014 2015 2016 2017 2018 2019
Manufacturer Recall Number:
Units Affected:
18,206
Notification Type:
Inconsequential
Issue:
On certain vehicles, the rear reflex reflectors may not have been manufactured correctly. As a result, the rear reflectors may reflect less light than what is required by Canadian regulations.
Safety Risk:
This small error does not affect vehicle safety.
Corrective Actions:
This is not a recall. The company has made changes to ensure that all new vehicles have fully compliant rear reflex reflectors.
Recall number
2020-514
Recall date
2020-10-28
System affected
Fuel Supply
Model year(s) affected
2013 2014 2015 2017 2018 2019
Manufacturer Recall Number:
SRC RB3 & SRC RB4
Units Affected:
109,189
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving.
Note: This recall is an expansion of recalls SRC R95/SRC R96 and SRC RA2/SRC RA3 (Transport Canada Recall Numbers 2020-005 and 2020-088).
Safety Risk:
A sudden loss of engine power could increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump.
Recall number
2020-088
Recall date
2020-03-04
System affected
Fuel Supply
Model year(s) affected
2013 2014 2018 2019
Manufacturer Recall Number:
SRC RA2 / SRC RA3
Units Affected:
111,529
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving.
Safety Risk:
A sudden loss of engine power could increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump.
Recall number
2017-363
Recall date
2017-07-20
System affected
Electrical
Model year(s) affected
2016
Manufacturer Recall Number:
SRC R47/R48
Units Affected:
39,189
Notification Type:
Safety TC
On certain vehicles, the electrical power cords of some dealer installed block heaters may have been improperly manufactured, causing the wires to contact each other, resulting in a short circuit. A short circuit could lead to a fire which would increase the risk of injury and/or damage to property. Correction: For vehicles where the subject block heater was approved for installation, the dealer will replace the block heater assembly with a new one of an improved design. For vehicles where the subject block heater was not approved for installation, dealers will remove the block heater assembly. In the interim, until the remedy can be performed, dealers will cut the plug end from the block heater cord to disable the block heater's operation.
Recall number
2014-458
Recall date
2014-10-16
System affected
Fuel Supply
Model year(s) affected
2006 2007 2008 2009 2010
Manufacturer Recall Number:
SSC255
Units Affected:
18,949
Notification Type:
Safety Mfr
On certain vehicles, the fuel delivery pipes in the engine compartment may have been produced with particles from the anti-corrosion plating on the gasket seating surface where the fuel pressure sensor is installed. This could affect the sealing properties of the gasket seated between the pressure sensor and the pipe, potentially resulting in a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will replace the gasket and repair the gasket seating surface.
Recall number
2014-186
Recall date
2014-05-22
System affected
Brakes
Model year(s) affected
2013
Manufacturer Recall Number:
SSC237
Units Affected:
463
Notification Type:
Safety Mfr
On certain vehicles, the brake pedal load sensing switch could fail. This would cause the brake warning light to illuminate and cause the brakes to apply while driving, without illuminating the brake lights. As a result, the vehicle could decelerate, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the brake pedal assembly.
Recall number
2013-297
Recall date
2013-09-04
System affected
Engine
Model year(s) affected
2007 2008 2009 2010 2011
Manufacturer Recall Number:
217
Units Affected:
3,922
Notification Type:
Safety Mfr
On certain vehicles, the bolts used to secure the housing and sprocket of the intake-side Variable-Valve Timing (VVT) gear assembly could loosen. If this occurs, the VVT gear will not control the intake valves correctly. In some instances, the VVT gear housing and sprocket could separate, causing the engine to stall. Engine stalling would result in a loss of vehicle propulsion which, in conjunction with traffic and road conditions, and the driver’s reactions, could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will replace the VVT unit with an improved version.
Recall number
2011-080
Recall date
2011-02-24
System affected
Other
Model year(s) affected
2006 2007
Manufacturer Recall Number:
132
Units Affected:
852
Notification Type:
Safety Mfr
On certain AWD vehicles, if the floor carpet near the accelerator pedal is not reinstalled correctly following a service repair, the plastic pad embedded into the floor carpet could interfere with the operation of the accelerator pedal. If this occurs, the accelerator pedal could temporarily become stuck in a partially depressed position, rather than return to the idle position. This could result in a loss of throttle control and a crash causing property damage and/or personal injury. Correction: Dealers will modify the plastic pad.
Recall number
2011-037
Recall date
2011-01-26
System affected
Fuel Supply
Model year(s) affected
2006 2007
Manufacturer Recall Number:
131
Units Affected:
11,773
Notification Type:
Safety Mfr
On certain GS 300, GS 300 AWD, GS 350, IS 250, IS 250 AWD and IS 350 vehicles, the fuel pressure sensor connected to the engine fuel delivery pipe may not have been sufficiently tightened during vehicle assembly. Should the pressure sensor loosen, fuel could leak past a gasket used in the connection between the sensor and pipe, and through the threaded portion of the sensor. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will inspect for fuel leakage from the threaded portion of the fuel pressure sensor. If there are no signs of a fuel leak, the fuel pressure sensor will be tightened to specifications. If a fuel leak is confirmed, the gasket between the sensor and the fuel delivery pipe will be replaced, and the sensor will be tightened.
Recall number
2010-221
Recall date
2010-07-05
System affected
Engine
Model year(s) affected
2007 2008
Manufacturer Recall Number:
119, 122
Units Affected:
3,702
Notification Type:
Safety Mfr
On certain vehicles, the material composition of the engine valve springs may include micro-foreign objects, which may compromise the strength of the valve spring, causing the spring to degrade and break. If a valve springs breaks, abnormal noise and rough engine performance will be noticed and, in the worst case, the engine could fail and stop suddenly while the vehicle is in motion. A sudden engine failure would result in lost propulsion which, in conjunction with traffic, road conditions, and driver's reactions, could increase the risk of a crash causing property damage, personal injury or death. Correction: Dealers will install new valve springs.
Recall number
2009-015
Recall date
2009-01-19
System affected
Fuel Supply
Model year(s) affected
2006 2007
Manufacturer Recall Number:
911
Units Affected:
8,391
Notification Type:
Safety Mfr
On certain vehicles, the use of selected ethanol fuels may cause the aluminium fuel rails to corrode. This could result in plugged fuel injector(s), causing a rough engine idle and/or the illumination of the engine warning lamp. Corrosion may also cause a pinhole to develop on the fuel rail, which could result in fuel leakage. Fuel leakage, in the presence of an ignition source, could result in a vehicle fire. Correction: Dealers will replace the fuel rails.
Select Another Vehicle